Underwater Navigation Technologies: How Submarines Navigate Without GPS
How do submarines determine their exact position thousands of metres beneath the ocean surface when GPS signals cannot reach them? The answer lies in a combination of precision sensors, inertial navigation, acoustic measurements and sophisticated navigation computers.
Introduction: Navigating in a World Without GPS
Modern navigation depends heavily on the Global Positioning System (GPS). Ships, aircraft, cars and smartphones use satellite signals to determine their position, speed and direction. But what happens when a vessel travels hundreds of metres beneath the ocean surface?
For submarines, GPS is not directly available underwater. Satellite radio signals are rapidly attenuated in seawater, making conventional satellite navigation impractical during submerged operations.
Yet submarines must continuously determine their position, direction, speed and depth. Even a small navigation error, if allowed to accumulate over a long journey, can result in significant positional uncertainty.
To overcome this challenge, submarines use a combination of navigation technologies that work together to maintain an estimate of their position. These include Inertial Navigation Systems (INS), gyroscopic sensors, Doppler velocity measurements, sonar-based navigation techniques, bathymetric references and pressure sensors.
Unlike a GPS receiver, which calculates its position using signals from satellites, a submarine's navigation system primarily relies on measuring its own movement and continuously calculating its changing position.
Understanding these technologies reveals how submarines navigate through an environment where external positioning signals are largely unavailable.
1. Inertial Navigation System (INS): The Foundation of Submarine Navigation
The Inertial Navigation System is one of the most important technologies used for submerged navigation.
An INS determines the movement of a submarine by measuring its acceleration and angular rotation. It does not require GPS signals, radio communication or external navigation references to calculate changes in position once it has been initialised.
A typical inertial navigation arrangement consists of:
Three-axis accelerometers.
Three-axis gyroscopes.
Navigation processing computers.
A reference coordinate system.
Software for position, velocity and attitude calculations.
How does an INS work?
An INS continuously measures movement along three principal axes:
X-axis: Forward and backward movement.
Y-axis: Sideways movement.
Z-axis: Vertical movement.
Accelerometers measure linear acceleration, while gyroscopes measure angular rotation. The navigation computer processes these measurements to calculate the submarine's orientation, velocity and estimated position.
The process involves three main stages.
Step 1: Measuring acceleration
The accelerometers measure changes in velocity along the three axes.
Step 2: Calculating velocity
The navigation computer mathematically integrates acceleration over time to estimate velocity, accounting for the submarine's orientation and the effects of gravity.
Step 3: Calculating position
Velocity is integrated over time to estimate changes in position. These changes are combined with the initial reference position to calculate the submarine's estimated location.
In simplified terms:
Acceleration → Velocity → Position.
Why does INS accuracy deteriorate over time?
Although an INS can operate independently of external signals, it has one major limitation: navigation errors accumulate over time.
Small errors in accelerometer measurements, gyroscope drift and alignment can gradually produce increasingly inaccurate position estimates.
For example, a small bias in an accelerometer can cause calculated velocity to become progressively inaccurate. When this error is integrated again to calculate position, positional error can increase further.
This phenomenon is known as inertial navigation drift.
Modern systems use highly accurate sensors, sophisticated calibration and advanced processing algorithms to minimise this problem. However, independent position or velocity references remain important for controlling accumulated errors.
2. Gyroscopic Sensors: Maintaining Direction Without a Magnetic Compass
Knowing the submarine's position is only one part of navigation. It must also maintain an accurate understanding of its heading and orientation.
A conventional magnetic compass determines direction using Earth's magnetic field. However, magnetic compasses can be affected by magnetic interference from the submarine's structure and onboard electrical equipment.
Gyroscopic sensors provide an alternative reference for measuring rotation and maintaining orientation.
Modern inertial navigation systems commonly use technologies such as:
Ring Laser Gyroscopes (RLG).
Fibre-Optic Gyroscopes (FOG).
Hemispherical Resonator Gyroscopes (HRG).
How do modern gyroscopes work?
A ring laser gyroscope uses two laser beams travelling in opposite directions around a closed optical path. When the instrument rotates, the effective path lengths experienced by the beams change, producing a measurable frequency difference known as the Sagnac effect.
A fibre-optic gyroscope works on a similar optical principle but uses light travelling through a coil of optical fibre.
These instruments measure angular rotation without requiring a conventional spinning mechanical rotor.
The measured rotation rates are processed by the navigation computer to determine changes in heading, pitch and roll.
It is important to distinguish a gyroscope from a complete gyrocompass. A gyroscope measures rotation, while a gyrocompass or north-seeking navigation arrangement uses additional principles and processing to establish a reference to true north.
Accurate heading and orientation measurements are essential because even a small alignment error can affect the accuracy of the entire inertial navigation solution.
3. Doppler Velocity Measurement: Measuring Movement Through Water
An INS calculates movement using acceleration measurements, but its errors accumulate over time.
One way of improving navigation accuracy is to obtain an independent measurement of the submarine's velocity.
Acoustic Doppler velocity instruments provide one method of doing this.
A Doppler Velocity Log (DVL) uses the Doppler effect to measure velocity relative to the seabed or, in certain operating modes, the surrounding water.
How does a DVL work?
A typical DVL uses multiple acoustic transducers arranged at different angles.
These transducers transmit sound pulses towards the seabed. The transmitted sound waves reflect from the seabed and return to the instrument.
If the submarine is moving relative to the seabed, the frequency of the returning acoustic signals changes due to the Doppler effect.
The system measures this frequency shift and uses it to calculate velocity.
Multiple acoustic beams allow the instrument to estimate velocity components in different directions.
The resulting velocity measurements can be supplied to the navigation computer to help correct errors in the inertial navigation solution.
Why is Doppler velocity measurement important?
A DVL provides an independent measurement of movement, making it valuable for improving navigation accuracy.
However, its performance depends on operating conditions.
Bottom-track operation requires suitable acoustic returns from the seabed.
Water depth and seabed characteristics influence performance.
Acoustic conditions can affect measurement quality.
Water-track measurements indicate velocity relative to the water, not necessarily relative to the seabed.
DVL technology is widely used in autonomous underwater vehicles and other subsea platforms. Its application and configuration vary between submarine classes and navigation architectures.
It should therefore be considered an aiding technology rather than a universal replacement for inertial navigation.
4. Bathymetric Navigation: Using the Ocean Floor as a Reference
The ocean floor is not a uniform surface. It contains mountains, valleys, ridges, trenches and other geological features.
These variations create opportunities for underwater navigation.
Bathymetry is the measurement and mapping of underwater depths and seabed topography.
By comparing measured depth profiles with previously available bathymetric information, a navigation system can identify geographical features and obtain additional information about its location.
How does bathymetric navigation work?
The general concept involves three stages:
Step 1: Measuring seabed depth
Acoustic instruments obtain measurements of the seabed beneath or around the platform.
Step 2: Comparing measurements with reference information
The measured depth profile is compared with an existing bathymetric database.
Step 3: Estimating position
If the observed seabed features correspond to known geographical features, the navigation system can use the match to improve its position estimate.
This approach is commonly described as terrain-aided or bathymetric navigation.
What are its limitations?
The effectiveness of bathymetric navigation depends on the availability and quality of reference data.
A seabed containing distinctive ridges, slopes and depth variations may provide useful geographical references. A relatively flat and featureless seabed provides fewer opportunities for reliable matching.
The accuracy of the system also depends on measurement quality, chart resolution and the reliability of the navigation algorithms.
Bathymetric navigation therefore complements other navigation methods rather than replacing them.
5. Acoustic Navigation: Using Sound to Determine Position
Sound travels much farther underwater than conventional radio signals, making acoustic techniques particularly useful for underwater positioning.
Acoustic navigation systems use sound signals exchanged between known reference points and underwater platforms to estimate position.
One example is the Long Baseline (LBL) acoustic positioning system.
How does acoustic positioning work?
An LBL system uses multiple acoustic transponders installed at known locations.
An underwater vehicle communicates acoustically with these transponders. By measuring the travel time of acoustic signals, the system estimates distances between the vehicle and the reference points.
With measurements from multiple known reference locations, the system can calculate the underwater vehicle's position relative to the acoustic array.
Other acoustic positioning approaches include:
Short Baseline (SBL): Uses multiple acoustic transducers arranged on a supporting vessel.
Ultra-Short Baseline (USBL): Uses a compact transducer array to estimate the range and direction of an underwater target.
These systems are particularly useful in underwater surveying, scientific research and remotely operated or autonomous underwater vehicle operations.
However, they generally depend on external reference equipment or supporting platforms. They are not a universal solution for a submarine independently navigating across large ocean areas.
Acoustic navigation is therefore an important part of underwater positioning technology, although its practical application differs from the self-contained inertial navigation used during submerged submarine operations.
6. Depth Measurement: Knowing the Vertical Position
Determining latitude and longitude is not enough for a submarine. It must also maintain accurate information about its depth.
Depth measurement is an essential component of underwater navigation and operational safety.
Submarines commonly use pressure-based depth measurement systems.
How does a depth sensor work?
Water pressure increases with depth.
A pressure sensor measures the surrounding hydrostatic pressure, and the depth-indicating system uses this information to estimate depth.
The underlying relationship is:
P = ρgh
Where:
P = Hydrostatic pressure.
ρ = Density of seawater.
g = Acceleration due to gravity.
h = Depth below the reference water surface.
In practical applications, the calculation may account for water density, atmospheric pressure references, sensor calibration and installation characteristics.
Pressure-based depth measurements are supplied to relevant onboard monitoring and control systems.
Depth information, combined with heading and horizontal position estimates, provides a more complete understanding of the submarine's three-dimensional location.
7. GPS Updates: How Submarines Correct Their Navigation Position
Although GPS cannot be used directly underwater, submarines can obtain satellite navigation updates when they have access to the surface or when suitable antennas are exposed above the water.
Depending on the submarine's design and operating circumstances, this may involve surfacing or using an appropriate navigation mast or antenna arrangement.
Once GPS signals become available, the submarine can obtain an external position reference.
The navigation computer can compare this reference position with the position calculated by the INS.
The difference helps identify accumulated navigation errors and correct the estimated position.
This process is known as navigation updating or position correction.
The frequency and method of obtaining external updates depend on the submarine's equipment and operating requirements.
The important point is that GPS is an external reference rather than the primary means of determining position during submerged navigation.
8. Integrated Navigation System: Bringing Everything Together
No single navigation technology provides a perfect solution.
INS offers continuous navigation but suffers from drift. Doppler velocity measurements can provide independent movement information. Sonar and bathymetric references can provide environmental information, while pressure sensors provide depth measurements.
Modern navigation architectures combine information from multiple sensors to develop a more reliable estimate of the submarine's position.
This process is called sensor fusion.
A navigation computer receives information from different sensors, evaluates their accuracy and combines the measurements using mathematical algorithms.
One commonly used approach in navigation engineering is the Kalman filter.
A Kalman filter estimates the state of a system by combining predictions from a mathematical model with new sensor measurements.
In an integrated navigation system, this approach can help combine inertial measurements with independent velocity, position and environmental references.
The system can continuously estimate:
Geographical position.
Heading and orientation.
Speed and velocity.
Depth.
Navigation uncertainty.
Changes in position over time.
The result is a continuous navigation solution that does not depend on GPS being available underwater.
9. Challenges of Underwater Navigation
Despite significant technological developments, underwater navigation remains challenging.
Some of the major engineering challenges include:
1. Accumulation of navigation errors
Inertial sensor errors can accumulate over time, reducing positional accuracy.
2. Limited external references
Unlike aircraft and surface vessels, submerged submarines cannot continuously access satellite navigation signals.
3. Variable acoustic conditions
Temperature, salinity, pressure and water layering influence the propagation of sound underwater.
4. Seabed limitations
Terrain-based navigation becomes less effective when the seabed has limited distinguishing features or reliable reference information is unavailable.
5. Sensor reliability
Navigation systems must operate continuously despite vibration, temperature changes, electrical disturbances and demanding environmental conditions.
These challenges explain why modern underwater navigation relies on multiple technologies working together rather than depending on a single sensor.
10. The Future of Submarine Navigation
Underwater navigation continues to evolve as sensor technology, computing power and autonomous systems improve.
Some important areas of development include:
Quantum inertial sensors
Research into atom-based sensing may offer new approaches to measuring acceleration and rotation with reduced reliance on conventional inertial sensors.
Advanced fibre-optic gyroscopes
Improvements in optical sensing can enhance heading and attitude measurement while reducing the effects of sensor drift.
Artificial intelligence
Machine learning may assist with sensor diagnostics, environmental interpretation and navigation data quality assessment.
Advanced bathymetric mapping
Improved seabed mapping can provide better reference information for terrain-aided navigation.
Integrated navigation architectures
More sophisticated sensor fusion can improve reliability and help identify inconsistencies between different navigation references.
These developments are promising, although their operational maturity and adoption vary considerably.
Conclusion
Navigating underwater without GPS is one of the most interesting engineering challenges associated with submarine operations.
Submarines overcome this limitation by combining inertial navigation, gyroscopic sensing, Doppler velocity measurements, sonar-based references, acoustic positioning and pressure-based depth measurement.
The Inertial Navigation System provides the foundation by continuously calculating movement from acceleration and rotation measurements. Other sensors and external references help correct accumulated errors and improve the reliability of the navigation solution.
The real achievement is not any individual sensor but the integration of several technologies into a single navigation architecture.
A submarine may be travelling hundreds of metres below the ocean surface, completely disconnected from satellite navigation signals, yet its onboard systems can continuously estimate where it is, which direction it is travelling and how deep it is operating.
Underwater navigation is ultimately a combination of physics, precision instrumentation, mathematics and advanced control engineering.





